Katalóg evidencie publikačnej činnosti PU

ID záznamu:	PU.Prešov.2012040211550941
Kategória:	N/A
Autor:	Vasilko Karol (50%)
Autor:	Kmec Ján (50%)
Názov:	Delenie materiálu : teória a technológia
Vydavateľské údaje:	Prešov : Datapress, 2003
Rozsah:	231 s.
ISBN:	80-7099903-9
Ohlas:	[4] 2011. SALOKYOVA, S., FABIAN, S., OLEJAR, T. Experimental impact verification of the feed speed of technological head in acceleration amplitude and vibrations frequency in teh production system with AWJ technology. In Manufacturing and industrial engineering, ISSN 1335-7972. 2011, vol. 10, no. 4, s. 49.
Ohlas:	[4] 2012. DOBROVIČ, Ján. Manažment II. Manažérske spôsobilosti – praktikum. [1. vyd.]. Prešov : Prešovská univerzita v Prešove, Fakulta manažmentu, 2012, s. 205. ISBN 978-80-555-0338-7.
Ohlas:	[1] 2010. HARNIČÁROVÁ, M., ZAJAC, J., STOIC, A. Comparison of different material cutting technologies in terms of their impact on the cutting quality of structural steel. In Technicki vjesnik, ISSN 1330-3651. 2010, vol. 17, no. 3, s. 376.
Ohlas:	[1] 2011. MAŠČENIK, J., GAŠPÁR, S. Experimental assessment of roughness changes in the cutting surface and microhardness changes of the material S 355 J2 G3 after being cut by non-conventional technologies. In Advanced materials research, ISSN 1022-6680. 2011, vo. 314-316, s. 1944-1947. ISBN 978-303785215-6.
Ohlas:	[3] 2011. FABIAN, S., SALOKYOVÁ, Š., OLEJÁR, T. Analysis and experimental study of the technological head feed rate impact on vibrations and their frequency spectra during material cutting using AWJ technology. In Nonconventional technologies review [online], ISSN 1454-3087. 2011 [cit. 2012-09-11], no. 3, s. 32. Dostupný na internete <http://www.revtn.ro/no3-2011.html>
Ohlas:	[3] 2011. SALOKYOVÁ, Š., FABIAN, S., OLEJÁR, T. Analysis of the abrasive grain size influence on vibrations acceleration frequency spectrum of technological head in the production system with AWJ technology. In Nonconventional technologies review [online], ISSN 1454-3087. 2011 [cit. 2012-09-11], no. 4, s. 87. Dostupný na internete <http://www.revtn.ro/no3-2011.html>
Ohlas:	[1] 2011. LITECKÁ, J., FABIANOVÁ, J., PAVLENKO, S. Relation between cutting surface quality and alloying element contents when using a CO 2 laser. In Acta Polytechnica, ISSN 1210-2709. 2011, vol. 51, no. 3, s. 39-45.